Transferring The System Program - Omron NT11 - 01-2004 User Manual

Transferring the System Program

Reference
3-5

Transferring the System Program

66
Initialize
Screen Data.
Are you sure?
(Yes:ENT No:F3+F4)
Initializing...
Completed.
Set DIP-SW2-2 to off
and Power OFF/ON.
2. Turn the NT11 power to OFF.
3. Set NT11 DIP SW2-2 to OFF and turn the power ON.
You can quit without initializing the memory by simultaneously pressing any
two of the function keys while the "Initialize Screen Memory?" screen is dis-
played.
Set DIP-SW2-2 to off
and Power OFF/ON.
To change the system settings or to register the screen data, set DIP-SW2-2
to OFF and call the System Menu screen by turning on the power to the NT11
while pressing two of the four function keys.
The NT11 DIP-SW2-2 is used to set "Screen data forced initialize effective/
ineffective". Setting this to ON selects "effective", and OFF "ineffective".
The system program of NT11 can be changed by the system transfer tool.
The system transfer tool is automatically installed in the personal computer
when the NT11 support tool is installed.
For details on how to start up the system transfer tool, and the system transfer
tool operation, refer to the NT-series Support Tool Operation Manual (V061-
E1-@).
Section 3-5
Press "ENTER".
The message shown to
the left is displayed during
initialization.
On completion of initializa-
tion, the message shown to
the left is displayed.