Switching The Screen Display - Omron NT11 - 01-2004 User Manual

Outline of Host Link/NT Link Operation
5-2-2

Switching the Screen Display

Reference
110
PLC:
Support tool: NT Support Tool for Windows Ver. 4.7
The following describes the procedure used to switch the NT11 screen display
by controlling from the PLC.
The display screen can be switched also by pressing a numeric key during the
operation after registering a screen number to the numeric key. For this func-
tion, refer to 4-7 Menu Screen Function (page 99).
To switch the NT11 screen display by controlling from the PLC, write a screen
number at the "screen switch setting" in the PT status control area.
NT11
Designated screen
[Screen switch setting in the PT status control area]
PT status notify bits
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Bit
Screen No. (4-digit BCD)
Word n
Screen number: 0000 (screen clear, no-display)
0001 to 0250
• Available allocation words
The PT status control area (PLC to PT) can be allocated to the following
PLC areas.
CQM1H
PLC
PT status control area
Screen switch setting
Copy memory
table setting
PT status control setting
Screen switch setting
Section 5-2
Screen number