Getting Starting; Role And Operation Of Nt11 - Omron NT11 - 01-2004 User Manual

Getting Starting

1-1

Getting Starting

Location
Handling
Cautions on Cleaning
Cautions on Afterimage
Cautions on Operating the System Keys
1-2

Role and Operation of NT11

Production Line Status Monitoring
2
To ensure that the NT11 works correctly, carefully observe the following when
installing and handling it.
Do not install the NT11 in a location subject to the following conditions;
• Near a computer, radio transmitter or receiver, etc.
• Dust, chemicals, or steam
• Severe temperature fluctuations
• High humidity and condensation
• Strong electrical or magnetic fields
• Poor ventilation
• Severe vibration
Do not;
• Subject the NT11 to strong shocks or vibrations
• Put heavy objects on the NT11
• Supply a voltage different from the specified voltage
• Disassemble or modify the NT11
To clean the front panel, use a soft, dry cloth. If it is very dirty, use diluted (2%)
neutral detergent.
Do not use volatile solvents such as benzene, thinner, or a chemically treated
cloth. Their use will cause deformation or discoloration.
If the same screen contents are kept displayed for a long time, an afterimage
may occur. To prevent this problem, either set the afterimage prevention func-
tion or make a program which periodically changes the displayed screen.
Do not operate the system keys with sharply pointed objects, such as your fin-
gernails or a screwdriver.
This could break the film.
NT11 is a programmable terminal used to display and transmit the information
in an FA site. The following gives a general description of the role and opera-
tion of the NT11 for those who use a programmable terminal (PT) for the first
time.
The NT11 displays real-time information about the system and equipment
operating status, etc.
Line 1 Status
Machine:NT11-SF121
Product: 137 units
75%
Section 1-1