Omron NT11 - 01-2004 User Manual page 38

Connection to a PLC by the Host Link (RS-232C Type)
Note
Note
Wiring for a Host Link Unit
(25-pin) Connection
Check the required components and prepare them in advance.
Name Model
XM2A-0901
Connector
XM24-2501
XM2S-0911
Connector
XM2S-0913
hood
XM2S-0911-E
XM2S-2511
Connector XM2S-0911-
set S003
AWG28´5P
IFVV-SB
Cable
CO-MA-VV-SB
5P´28AWG
After connecting a communication cable, always secure it with the screws.
Otherwise the cable may disconnect, causing operation to fail.
OMRON Cables with Connectors
The OMRON cables listed below can be used when connecting with a method
other than the memory link method.
Model Cable Length
XW2Z-200S
XW2Z-500S
XW2Z-200T
XW2Z-500T
The cable's tensile load is 30 N. Do not subject it to loads greater than this.
Otherwise a discontinuity may occur, causing operation to fail.
Applicable Units: C200H-LK201-EV1
CV500-LK201 (communication port 1)
Compatible cables with attached connectors:
XW2Z-200S (9-pin Û 25-pin, 2 m)
XW2Z-500S (9-pin Û 25-pin, 5 m)
Remarks
9-pin
Made by OMRON
25-pin
Made by OMRON
9-pin
Made by OMRON
9-pin
Made by OMRON
9-pin
Made by OMRON
25-pin
Made by OMRON
9-pin
Made by OMRON, con-
nector and hood included
Multi-core shielded cable
Made by Fujikura, Ltd.
Multi-core shielded cable
Made by Hitachi Cable,
Ltd.
Connector Specification
2 m
5 m
2 m
5 m
Section 2-4
Delivered with
CS-series CS1G/CS1H,
CS1G-H/CS1H-H
CJ-series CJ1G
C-series CQM1, C200HS,
C200HX/HG/HE(-Z)E,
CVM1/CV-series CPU
Units
CV500-LK201
CV500-LK201
C200H-LK201-EV1
C-series CQM1, C200HS,
C200HX/HG/HE-(Z)E,
CVM1/CV-series CPU
Units
CV500-LK201
---
CS-series CS1G/CS1H,
CS1G-H/CS1H-H
CJ-series CJ1G
CV500-LK201
C200H-LK201-EV1
---
---
---
9-pin Û 25 pin
9-pin Û 9-pin
25