Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 99

Control Screens
Changing SP
Changing MV
Remote/Local (R/L)
Switching
Note
A/M Switching
MV Adjustment Area Details:
Basic PID (011), Advanced PID (012), Batch Flowrate Capture (014), Indication and Operation (032),
Ratio Setting (033)
2-position ON/OFF (001)
AUTO or remote (CAS)
84
Change SP using the SP Change Up/Down Buttons.
First press the SP Button, select the value column, and then enter the change
using the ten-key dialog (using the mouse), or the keyboard. (The ten-key pad
is displayed when the input box is selected. To enable inputting from the ten-
key, click the System Info. Button in the Setup Dialog Box, and then change
the setting to enable the ten-key.
Change the MP using the MP Change Up/Down Buttons.
First press the MP Button, and then enter the change using the ten-key dialog
box (using the mouse), or the keyboard.
When the SP setting (local only, or remote/local both possible) for ITEM024
for Basic PID, Advanced PID, Indication and Setting, Ratio Setting, 2-position
ON/OFF, and 3-position ON/OFF is 1 (remote/local both possible), CAS is dis-
played.
When the CAS Button is red, the setting is on remote SP. When the CAS But-
ton is blue, the setting is on local SP. Click the CAS Button to switch the set-
ting.
When the CX-Process Monitor Plus is set to Remote SP, A/M automatically
switches to AUTO. You cannot set Manual.
When AUTO is lit red, the setting is AUTO. You can change the SP value.
When MAN is lit blue, the setting is manual. You can change MV and SP val-
ues. Select AUTO or MAN to switch.
MV open direction MV open direction
enabled (0%) enabled (100%)
AUTO or Manual
remote (CAS)
No Manual Pointer
Make Manual Pointer and MV open direction settings when registering the
Control Screen. Refer to 5-5-2 Overview of Screen Registration for details.
Make output limit (ML, MH) settings using the Tuning screen. Refer to 4-8 Tun-
ing Screens for details.
Manual
Output operation switches
AUTO or
remote (CAS)
Manual
Pointer
Output limit (ML) Output limit (MH)
3-position ON/OFF (002)
AUTO or remote (CAS) Manual
Output operation switches
Section 4-7
MV open direction
disabled
Manual