Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 181

Creating Graphic Screens
Note
Setting Figures and Images
Setting Figures
( )
Note
1,2,3...
Note
166
1. A maximum of ten faceplates can be simultaneously displayed on Graphic
Screens by using FP switches.
2. All faceplates displayed on a screen will be lost by moving to another
screen while the faceplates are being displayed.
This section describes how to set lines, rectangles, rectangles with rounded
corners, ellipses, and polygons.
The figure background color and border line color can be changed using tag
values.
Example: Changing Figure Background Color from White to Red by
Turning ON Tag001
Background
color
Border line
Tag001:
color
Background color
white when ON
Drawing Method
Lines, Rectangles, Rectangles with Rounded Corners, and Ellipses
1. In Object Tool Bar click the icon of the figure to be drawn, or select Insert
Figure/Image and then Line, Rectangle, Round rect or Ellipse.
2. Click the start point and drag to the end point.
Start point
Drag
Adjusting Rectangles with Rounded Corners
The angle of a corner in a rectangle with rounded corners can be adjusted by
clicking on the point displayed in the upper right-hand corner (■).
Tag001:
Background color
red when OFF
End point
Drag
Section 5-4