Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 186

Creating Graphic Screens
Note: Setting Threshold Values
Contact ITEM:
Set the image files to be displayed when
the tag value is ON and OFF.
Note
For details on the Show/Hide Tag Settings Tab and the Flashing Tag Settings
Tab, refer to Common Settings for Graphic Objects in this section.
When specifying multiple image files to be displayed for an image object, the
following procedure can be used to check the contents of the image files.
1. Double-click the image object to select it.
2. Right-click and select Switch Image and then Image1(1) to Image4(4)
from the menu.
Analog ITEM:
Set the threshold values for changing the image
file displayed.
Set the image to be displayed.
The setting must be made at near the
threshold value.
If nothing is set, the display will be filled
in black.
Set the threshold values.
Set the values in order from the bottom, with the smallest
value first.
Section 5-4
171