Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 231

System Information Settings
Disabling Auto-start
1,2,3...
216
Click here.
The auto-start setting can be disabled by using either of the following two
methods.
1. Double-click the MonitorCom.exe file from Explorer to independently open
the System Information settings (which include label information, alarm
sound information, ten-key, color, and key lock settings) and disable auto-
starting under the Auto-start settings.
2. If the auto-start is enabled, right-click at the top of an Overview Screen and
then click the Yes Button in the dialog box that will appear to open the Sys-
tem Information settings. Disable auto-starting under the Auto-start set-
tings.
Section 5-6
CRT-ID and other
information
displayed here.