Registering Operation Guide Messages - Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual

Screen Configuration
5-5-3

Registering Operation Guide Messages

1,2,3...
198
Detailed Settings
Select the tag name, and then click the Details Button. The following dialog
box will be displayed.
Complete the settings, and then click the OK Button.
4. Make the above settings, and then click the OK Button.
The Annunciator Screen will be registered, and the name of the screen you
entered will be displayed in the Screen Management Tree.
This section explains how to register Operation Guide Messages.
If the conditions registered here occur, the corresponding message will be dis-
played on the Operation Guide Log Screen, and saved.
1. Select OpgLog Mess01 int the CRT Builder's Screen Management Tree.
Click to select. Double-click to omit
Step 2 of the operation.
2. In the Settings Menu, select Register Screen, or double-click OpgLog
Mess01.
The following dialog box will appear.
Select the character display
color.
Enter the message to be displayed
on the Annunciator Screen. You can
enter up to eight full-width
characters x two rows.
Select Non-lock In (0), or Lock-in (1).
Select the sound type.
Click the Test Button to hear the sound selected.
Refer to 5-6 System Information Settings for
allocating sound files and sound numbers.
Select the background color.
Section 5-5