Setting Passwords - Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual

Basic Configuration Operations
Stopping
5-2-2

Setting Passwords

1,2,3...
142
4. A dialog box will be displayed to input the password.
Note If no password has been set for the initial startup, the dialog box for registering
a password will be displayed when the Setup Button is clicked. It is not possi-
ble to configure screens or make settings unless a password has been regis-
tered and the correct password has been entered. Personnel who will be
making settings must register a password.
For details on registering passwords, refer to 5-2-2 Setting Passwords.
5. Enter the password and click the OK Button. The Setup Dialog Box will be
displayed.
In the Main Window, click the Exit Button.
The Main Window will close, and CX-Process Monitor Plus will stop running.
Set the password to configure the CX-Process Monitor Plus Screen and to
protect the settings you have made.
Note Unless a password has been set and the correct password has been entered,
it will not be possible to make any settings.
1. If no password has been set and if new tag information is imported, the fol-
lowing dialog box will be displayed when the Setup Button is clicked in the
Main Window.
2. Click the OK Button.
The following dialog box will be displayed.
Section 5-2