Relation Between Screens And Function Blocks - Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual

CX-Process Monitor Plus
1-1-5

Relation between Screens and Function Blocks

Screen
Loop Control Boards: Make HMI settings
User- Overview ---
defined Screen
screens
Control Basic PID, Advanced PID, Blended PID
Screens (Block Model 013), Batch Flowrate Capture
(Block Model 014), Indication and Setting,
Indication and Operation, Ratio Setting,
Indicator, 2-Position ON/OFF, 3-Position
ON/OFF, High/Low Alarm, Segment Pro-
gram 2, ON/OFF Valve Manipulator, Motor
Manipulator, Reversible Motor Manipulator,
Motor Opening Manipulator, Timer, Counter
Tuning Segment Program 2
Screens
Trend Basic PID, Advanced PID, Blended PID
Screens (Block Model 013), Batch Flowrate Capture
(Block Model 014), Indication and Setting,
Batch Trend
Indication and Operation, Ratio Setting,
Screen
Indicator, 2-Position ON/OFF, 3-Position
ON/OFF (PV, SP, MV only), Segment Pro-
gram 2, ON/OFF Valve Manipulator, Motor
Manipulator, Reversible Motor Manipulator,
Motor Opening Manipulator
Segment Segment Program 2
Program 2
Screen
Graphic Same tag ITEMs as for Control screens.
Screens
Annunciator Same tag ITEMs as for Control screens.
Screens
Operation ---
Guide
Screens
System ---
Monitor
Screens
System Alarm Log Contacts for which alarms were automati-
screens Screens cally allocated when registering tags
Operation ---
History
Screens
System ---
Monitor Log
Screens
The relation between screens and function blocks is shown below.
Loop Control Unit: Register Send All
Blocks and Receive All Blocks blocks
in the System Common block
Input Selector Internal Switch
block (Block block (Block
Model 162) Model 209)
--- ---
Analog signal Contact signal
or analog value or contact
parameters parameters
--- ---
Analog signal Contact signal
or analog value or contact
parameters parameters
Can be desig- Can be desig-
nated as nated as
expansion mea- expansion mea-
surement tags surement tags
Analog signal Contact signal
or analog value or contact
parameters parameters
--- Contact signal
or contact
parameters
--- Contact signal
or contact
parameters
--- ---
--- Contacts for
which alarms
were automati-
cally allocated
when register-
ing tags
--- ---
--- ---
Section 1-1
Constant
Generator
block (Block
Model 166)
---
Analog output
---
Analog output
Can be desig-
nated as
expansion mea-
surement tags
Analog output
---
---
---
---
---
---
15