Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 196

Screen Configuration
Note Tag ITEM is a fixed name allocated beforehand to specific ITEMs
(PV, SP, and MV, etc.) for a specific Function Block (Control Block,
and part of the Operation Block). Refer to Appendix A Reading/
Writing Function Block ITEMs for details.
2. Tag names for analog ITEMs and contact ITEMs.
Refer to the following table for the relation between each screen and the tag
name/tag ITEM given above.
Screen
tag names for
function blocks
Control Screen Can be specified
Trend Screen Can be specified
Batch Trend Screen Can be specified
Segment Program 2 Can be specified
Screen
Graphic Screen Can be specified
Annunciator Screen Can be specified
Operation Guide Can be specified
Screen
Alarm Log Screen Can be specified
Note Only optional tags can be set.
Example 1
Specifying the Function Block for the Control Screen as Function Block with
tag name "ABC."
Tag name ABC
CX-Process
Monitor Plus
Tag name: Specify ABC
Loop Control
Unit/Board
Example 2
Specifying the analog ITEM for the Trend Screen trends as Function Block
Tag ITEM "MV" for tag name "ABC."
Tag name ABC
Tag ITEM MV
1
Tag ITEMs for the
function block
---
Can be specified
Can be specified
Can be specified
Can be specified
Can be specified
Can be specified
Can be specified
Control Screen
Section 5-5
2
tag names for
analog ITEMs and
contact ITEMs
Can be specified
Can be specified
Can be specified
Can be specified
(See note.)
Can be specified
Can be specified
Can be specified
Can be specified
181