Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Operation Manual page 182

Creating Graphic Screens
1,2,3...
Select whether border lines are to be
used for the figure.
Select how the border line color is to
be displayed.
Direct color settings:
The border line color is fixed.
The color is directly specified in
the Color settings.
Tag settings:
The border line color is changed
according to the tag value.
Select the tag name for controlling the border line color.
Polygon
1. Either click the polygon icon in the Object Tool Bar or select Insert Figure/
Image - Polygon.
2. Click the end point and then click the next corner.
Start point
Click
3. Double-click the end point.
Setting Method
The settings are described here using a figure (rectangle with rounded cor-
ners) as an example.
Border Line Tab
Set the line width for
when the line type is
solid line.
Set the condition for the border line color to be displayed.
The screen displayed will depend on the tag type (contact ITEM or analog ITEM). (See note.)
Double-click
Set the type of line
to be used for the
border lines.
Select the tag ITEM.
Section 5-4
Set the rounding
of the corners.
167