Omron SYSDRIVE 3G3MV SERIES User Manual page 320

List of Parameters
Para Reg- Name
me- ister
ter No.
No. (Hex)
n060 013C Frequency
reference
gain
n061 013D Frequency
reference
bias
n062 013E Analog fre-
quency ref-
erence fil-
ter time
constant
n063 --- Not used
n064 0140 Frequency
reference
loss detec-
tion (See
note.)
n065 0141 Multi-func-
tion analog
output type
selection
10-18
Description
Used to set the input characteristics of analog
frequency references.
Gain: The frequency of maximum analog input
(10 V or 20 mA) in percentage based on the (10 V or 20 mA) in percentage based on the
maximum frequency as 100%.
Bias: The frequency of minimum analog input
(0 V or 0 or 4 mA) in percentage based on the
maximum frequency as 100%.
Used to set the digital filter with a first-order lag
for analog frequency references to be input.
---
Selects the frequency loss detection function
for when the frequency reference from the con-
trol circuit terminal suddenly drops.
0: Disable (Operate according to frequency ref-
erence.)
1: Enable (Continue operation at 80% of fre-
quency reference prior to loss.)
* Frequency reference loss: Frequency refer-
ence voltage drop of 90% within 400 ms.
Selects the multi-function analog output type.
0: Analog voltage output (functions set in n066)
1: Pulse train output (functions set in n150)
Chapter 10
Set- Unit Defaul Chan-
ting of t set- ges dur-
range set- ting
ting opera-
0 to 1% 100 Yes
255
–100 1% 0 Yes
to 100
0.00 0.01 s 0.10 Yes
to
2.00
--- --- --- ---
0, 1 1 0 No
0, 1 1 0 No
Ref-
er-
ing ence
page
tion
5-13
5-13
5-14
---
5-17
5-38