Omron SYSDRIVE 3G3MV SERIES User Manual page 128

Basic Operation
• If acceleration/deceleration time selection 2 (setting: 27) is not set at any multi-function input from
n050 to n056, the Inverter will determine that the acceleration/deceleration selection 2 is set to OFF,
and select the acceleration/deceleration time.
In the same way, if acceleration/deceleration time selection 1 (setting: 11) is not set at any multi-func-
tion input, the Inverter will determine that the acceleration/deceleration selection 1 is set to OFF, and
select the acceleration/deceleration time.
• Deceleration time 2 is used if emergency stop (setting: 19 to 22) is set at any multi-function input from
n050 to n056 and if decelerate to a stop (setting: 0) is set at stopping mode selection n005.
n019
Acceleration Time 1
Setting 0.0 to 6,000 (s) (See note 1.)
range
n020
Deceleration Time 1
Setting 0.0 to 6,000 (s) (See note 1.)
range
n021
Acceleration Time 2
Setting 0.0 to 6,000 (s) (See note 1.)
range
n022
Deceleration Time 2
Setting 0.0 to 6,000 (s) (See note 1.)
range
n041
Acceleration Time 3
Setting 0.0 to 6,000 (s) (See note 1.)
range
n042
Deceleration Time 3
Setting 0.0 to 6,000 (s) (See note 1.)
range
n043
Acceleration Time 4
Setting 0.0 to 6,000 (s) (See note 1.)
range
n044
Deceleration Time 4
Setting 0.0 to 6,000 (s) (See note 1.)
range
5-26
Register 0113 Hex
Unit of 0.1 s
setting (See note
1.)
Register 0114 Hex
Unit of 0.1 s
setting (See note
1.)
Register 0115 Hex
Unit of 0.1 s
setting (See note
1.)
Register 0116 Hex
Unit of 0.1 s
setting (See note
1.)
Register 0129 Hex
Unit of 0.1 s
setting (See note
1.)
Register 012A Hex
Unit of 0.1 s
setting (See note
1.)
Register 012B Hex
Unit of 0.1 s
setting (See note
1.)
Register 012C Hex
Unit of 0.1 s
setting (See note
1.)
Chapter 5
Changes during Yes
operation
Default setting 10.0
Changes during Yes
operation
Default setting 10.0
Changes during Yes
operation
Default setting 10.0
Changes during Yes
operation
Default setting 10.0
Changes during Yes
operation
Default setting 10.0
Changes during Yes
operation
Default setting 10.0
Changes during Yes
operation
Default setting 10.0
Changes during Yes
operation
Default setting 10.0