Omron SYSDRIVE 3G3MV SERIES User Manual page 126

Basic Operation
n075
Pulse Train Frequency Reference
Bias
Setting –100 to 100
range
Frequency
reference (Hz)
H Pulse Train Frequency Reference Input Filter Constant (n076)
• This parameter can be used to set a primary-delay digital filter for pulse train frequency reference in-
put.
• This parameter setting is effective for smooth operation of the Inverter if the pulse train input signal
changes too rapidly or the signal is interfered with by noise.
• The larger the set value is, the lower the response will be.
n076
Pulse Train Frequency Reference
Input Filter Constant
Setting 0.00 to 2.00
range
5-24
n011: Maximum frequency
Register 014B Hex
Unit of 1%
setting
Pulse train input frequency (Hz)
Register 014C Hex
Unit of 0.01 s
setting
Chapter 5
Changes during Yes
operation
Default setting 0
Changes during No
operation
Default setting 0.10