Omron SYSDRIVE 3G3MV SERIES User Manual page 121

Basic Operation
H Setting Frequency References 1 through 16 and the Inching Frequency
Command (n024 through n031, n120 through n127)
Frequency references 1 through 16 and an inching frequency command can be set together in the
Inverter (using registers n024 through n31, n120 through n127).
D Setting Frequency References 1 through 16 (n024 through n31, n120 through n127)
n024
Frequency Reference 1
Setting 0.00 to max. frequency
range
n025
Frequency Reference 2
Setting 0.00 to max. frequency
range
n026
Frequency Reference 3
Setting 0.00 to max. frequency
range
n027
Frequency Reference 4
Setting 0.00 to max. frequency
range
n028
Frequency Reference 5
Setting 0.00 to max. frequency
range
n029
Frequency Reference 6
Setting 0.00 to max. frequency
range
n030
Frequency Reference 7
Setting 0.00 to max. frequency
range
n031
Frequency Reference 8
Setting 0.00 to max. frequency
range
Register 0118 Hex
Unit of 0.01 Hz
setting (See note
1.)
Register 0119 Hex
Unit of 0.01 Hz
setting (See note
1.)
Register 011A Hex
Unit of 0.01 Hz
setting (See note
1.)
Register 011B Hex
Unit of 0.01 Hz
setting (See note
1.)
Register 011C Hex
Unit of 0.01 Hz
setting (See note
1.)
Register 011D Hex
Unit of 0.01 Hz
setting (See note
1.)
Register 011E Hex
Unit of 0.01 Hz
setting (See note
1.)
Register 011F Hex
Unit of 0.01 Hz
setting (See note
1.)
Chapter 5
Changes during Yes
operation
Default setting 6.0
Changes during Yes
operation
Default setting 0.00
Changes during Yes
operation
Default setting 0.00
Changes during Yes
operation
Default setting 0.00
Changes during Yes
operation
Default setting 0.00
Changes during Yes
operation
Default setting 0.00
Changes during Yes
operation
Default setting 0.00
Changes during Yes
operation
Default setting 0.00
5-19