Table of Contents
Advertisement
TCD Analyzer
4.8.1.2 M
M
ANUAL
When user set Zero calibration mode as Manual and clicks on the
"Touch to Start the Calibration" button, System displays Zero Manual
Run screen.
Zero Cal screen 1:
The screen in manual mode is similar but since this time the Coarse
and the Fine adjustment are done manually by the operator, there is a
zero adjustment field that can be adjusting by inputting the value in a
numeric keypad or quickly advance with small left and right arrow ◄►.
The coarse adjustment is first. Tapping on the numeric field of the Zero
Adj value will bring up the numeric keypad for adjusting.
Teledyne Analytical Instruments
Z
ODE
EROING
Operation
91
Advertisement
Table of Contents
