10-6
Processors
Figure 10-5. Installing a second Pentium III processor
4.
Appearance may vary depending on the model of your workstation.
Reassemble the workstation and connect the power cord to the grounded
AC outlet and to the workstation.
IMPORTANT: When replacing the side access panel, be sure to tighten all
four thumbscrews.
Upgrading the Processor
To upgrade the processor, follow the installation procedures included with the
processor upgrade kit.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
File Name: K-CH10.DOC Last Saved On: 1/26/99 3:06 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED