Mirus for H2/H3 Graingage User's Guide
Cycle Sample B two
4.
more times.
5.
Sample C
Cycle Sample C two
6.
more times.
Note: This table reflects the minimum number of cycles needed to create a calibration
file. To improve your calibration file, cycle several more moisture samples.
M2.0 Chamber Calibration
In the Calibration Wizard,
1.
Enter a Name for the calibration file.
2.
Enter the Chamber Inserts count.
The insert count is the number of inserts present in the chamber. It is used to
select default volume for the test chamber, which is important to the accuracy of
the system.
For more information about insert counts and installing the inserts, see the H2
and H3 Classic GrainGage Hardware Manual .
5. Chamber Calibration
Wet
Test weight output should reflect the
Grain
bench top test weight.
68