Prepare Samples - Juniper HarvestMaster mirus H2 Classic GrainGage User Manual

Mirus for H2/H3 Graingage User's Guide
SCiO calibration
The SCiO data is only available when Mirus has connected to the H3
GrainGage and you are using a SCiO NIR sensor.
For more information about the SCiO calibration, see Create a SCiO
Calibration File.
M2.0 moisture calibration
The M2.0 moisture model is a preset model that is used with EM2 and EM3
sensors.
For more information about the M2.0 moisture calibration, see Create an
M2.0 Calibration File.
EM moisture curve
For more information about the EM moisture curve, see Create an EM
Calibration File.
Grains Scanned by each Sensor
Sensor
SCiO
M2.0
Measures Moisture only
EM
Measures Moisture only
For more information about the industry moisture standard,
Moisture and Test Weight.
M2.0 calibrations are performed with systems that have an EM2 or EM3 sensor.

Prepare Samples

Preparing your samples is a critical first step towards creating and maintaining an
effective moisture curve.
Imitate harvest conditions. When calibrating, imitate harvest conditions as closely as
possible.
5. Chamber Calibration
Grain
Wheat—Moisture, Protein
Corn—Moisture
Soybean—Moisture, Protein, Oil
Barley—Moisture, Protein
Wheat
Corn
Soybean
Oats
Barley
Canola/Rapeseed
Rice
All Grains
see Appendix A: Standard
62