Mirus for H2/H3 Graingage User's Guide
Mirus Installation
The Mirus app operates the H2 and H3 Classic GrainGage and runs on a Windows tablet.
The H2 Classic GrainGage uses an EM sensor to detect the EM or M2.0 moisture content
of the sample. The H3 Classic GrainGage can use a SCiO sensor to detect the SCiO
constituent data, or an EM sensor to detect the EM or M2.0 moisture content of the
sample.
GrainGage
H2 Classic
H3 Classic
H3 Classic
System Requirements
Operating System: Windows® 10 or higher; 32 or 64-bit OS
Processor Speed: 2.0 GHz Quad Core
Memory: 8 GB or higher recommended
Data Storage: 500 MB available disk space
Display Resolution: 1280 x 800 or higher
Mirus Version: 4.5.0 or higher
Download and Install Mirus
Download and Activate Mirus for the H2 and H3 Classic GrainGage
After you have purchased a license for Mirus for the H2 GrainGage,
1.
Go to http://www.harvestmaster.com/support/mirus/downloads.
2.
Tap the down arrow for Mirus Harvest Software.
3.
Select and download the most recent Mirus release.
4.
Follow the installation instructions.
5.
Go to
http://www.harvestmaster.com/activate
6.
HarvestMaster will send the unlock code via email.
7.
Return to the Mirus activation screen and input the unlock code.
Enable the H3 Classic GrainGage Plugin
After you have purchased a license for the H3 Plugin,
1.
Open the Mirus Plugin Manager and enable the H3 Plugin, close the Plugin
Manager.
Note: When you attempt to connect to the H3 GrainGage Plugin for the first time,
Mirus will prompt you to register the plugin. The H3 Plugin is registered separately
from Mirus.
2.
Go to
http://www.harvestmaster.com/activate
1. Mirus Installation
GrainGage Connections
Sensor
EM
EM Moisture and M2.0 Moisture
EM
EM Moisture and M2.0 Moisture
SCiO
SCiO constituent data
Calibration
and fill out the form.
and fill out the form.
9