Table of Contents
Advertisement
Mirus for H2/H3 Graingage User's Guide
When Slope and Motion Compensation is enabled, Q should be
1.000 +/- .05 (depending on the slope the combine is on or intensity
of vibrations/movement).
If the Q value is off, see
H2 GrainGage Sensor Info Diagnostics
On the Sensor Info Diagnostics screen, live values are shown for the sensor in the
GrainGage.
H2 Sensor Info Diagnostics
Item
Moisture
Calibration Name
Moisture
Calibration Type
Moisture Voltage
3. GrainGage Diagnostics & Alerts
Slope and Motion
Description
This is the moisture measurement for grain in the test weight
chamber.
This is the name of the grain moisture curve that is applied. It
is typical to have a moisture curve for each type of grain being
harvested (e.g. corn, wheat, soybeans, etc.).
This displays the type of the active moisture calibration—EM
or M2.0. If the M2.0 calibration is active the grain type is
displayed.
This is a relative voltage reading that is calculated based on
the EM sensor reading and empty chamber voltage. This
voltage is part of moisture curve calculations. It can be used
to tune or generate a new EM moisture curve.
Calibration.
38
Advertisement
Table of Contents
