Mirus for H2/H3 Graingage User's Guide
The values set here help calculate the yield per acre (bu/ac, kg/ha) using the weight
measurements divided by the plot area. For each minimum and maximum changed, the
Legend will change to match the correct values.
Adjusting the minimum and maximum values helps to create a more detailed legend
and define the scope of the graphs and maps. The narrower the minimum and
maximum range, the more detailed the information displayed becomes.
For examples of standard bulk density and standard moisture values,
Standard Moisture and Test
Collect Harvest Data
Harvest with Cycle Button
Note: It is best to use the countdown timer. Using the countdown timer typically gives a
more consistent clean-out time from plot to plot which can improve the quality of your
data.
1.
Open the Mirus Harvest screen.
2.
Select a map, configure the harvest setup, choose traits, and a moisture curve.
See Open Harvest Mode for specifics.
3.
Start the thresher and throttle up.
4.
Tare the GrainGage if necessary.
5.
Tap
in Mirus.
7. Harvest Mode
Weight.
see Appendix A:
147