Mirus for H2/H3 Graingage User's Guide
Tare warning values
have been adjusted.
If the problem persists, contact the HarvestMaster Field Service Engineers at the number
in Contact a HarvestMaster Field Service
Contact HarvestMaster
Instructional Content
Visit the
HarvestMaster YouTube
instructional videos and help articles on Mirus and the GrainGage.
This instructional content includes (but is not limited to):
M2.0 Calibration
Recalibrate Traditional Moisture Curve to the New M2.0 Model in Mirus 4.3.0
Mirus Overview
Weight Tare Warnings
Errors on Power Up with Mirus
Mirus Locks Up
GrainGage Will Not Connect
Contact a HarvestMaster Field Service Engineer
Phone Number: 435-753-1881
Email: hmtechsupport@junipersys.com
Address: 1132 W 1700 N, Logan, UT 84321
Appendix B: Troubleshooting Mirus
• Lengthen the evacuation time by 500 milliseconds.
• Harvest another plot and check again.
Restore the values to the default setting. See
Sensors
Settings.
Engineer.
channel and the
HarvestMaster Support
the Weight
page for
161