Mirus for H2/H3 Graingage User's Guide
All gates are in the correct position for Harvest Mode.
Weight Diagnostics
On the Weight Diagnostics screen, live values are shown for the load cells.
Item
Weight
Load Cell A &
B millivolts
Q
3. GrainGage Diagnostics & Alerts
Weight Diagnostics
Shows the weight of the contents in the weigh bucket.
To change the units of measure,
These readings are for the two load cells that measure plot weight.
The millivolt readings vary linearly with weight added. The empty
weigh bucket causes the load cells to read between 3 and 4 mV.
This multiplier corrects the weight measurement based on the
slope and motion of the weighing platform.
When Slope and Motion Compensation is disabled, Q is 1.000.
Description
see Set Preferred Units of
Measure.
37