Table of Contents
Advertisement
Mirus for H2/H3 Graingage User's Guide
4.
Tap the check icon
SCiO NIR Sensor Self Test
Note: This option is only available with H3 GrainGage.
To run the SCiO NIR Sensor Self Test,
1.
From Setup > H3 GrainGage > Calibration, tap SCiO NIR Sensor Self-Test
Calibration
2.
Tap Open Calibration Wizard.
3.
Follow the on-screen video instructions as shown below.
4.
Ensure that there are two people performing the calibration.
4. H2 or H3 Weight Calibration
to close Diagnostics.
55
Advertisement
Table of Contents
