Table of Contents
Advertisement
Mirus for H2/H3 Graingage User's Guide
Setup
Parameter
Moisture Tare
Warning
Note: To edit other moisture settings,
Configure Overflow Sensor
Go to the Setup > H2 or H3 GrainGage > Sensors screen.
1.
Tap Level Detect.
Mirus opens the Level Detect Sensors Setup screen on which you can configure Level
Clear Delay and enable/disable the Overflow Sensor.
Note: Typically, only H2 or H3 Classics mounted on Wintersteiger Quantum or Classic
Plus combines are equipped with an overflow sensor that trips when grain is in close
proximity.
Setup Parameter
Level Clear Delay
Overflow Sensor
2. Mirus and GrainGage Setup
Default
Description
Value
A tare warning is generated when a tare
1%
check indicates that the moisture is above
this threshold.
see M2.0 Moisture Model
Level Detect Sensor Settings
Default Value
1000 msec
Yes
Recalibration.
Description
The amount of time delay between last
level/weight trip and the start of the flush
cycle.
Enables the sensor for use in overflow
detection.
27
Advertisement
Table of Contents
