Table of Contents
Advertisement
Mirus for H2/H3 Graingage User's Guide
Cycle Count is used to execute conditions based on the current
Cycle Count
cycle number.
Actions
The actions in a conditional action are the functions to be performed at an evaluation
point, should the conditions be met. For example, an action would be helpful in the
following scenario: an air diverter needs to be actuated at the start of a flush cycle to
ensure all the grain from the cyclone has fallen into the GrainGage before closing the
isolation gate.
Action Type
Actuate
Allows the user to actuate a specified actuator open or close.
Allows the user to delay the cycling sequence for a specified
Delay
amount of time (in milliseconds).
Appendix C: Use the Conditional Action Plugin
Actions (then)
Description
169
Advertisement
Table of Contents
