Install Nir Upgrade For Single, Twin, And Triple; Remove The Test Chamber - Juniper HarvestMaster GrainGage H2 NIR Upgrade Installation Manual

H2 NIR Upgrade Installation Guide

1 Install NIR Upgrade for Single, Twin, and Triple

1.1 Remove the Test Chamber

1. Turn off air and power. Follow all lockout/tagout procedures.
Install NIR Upgrade for Single, Twin, and Triple
2. At the T fittings, disconnect the air lines that connect
the air valve to the test chamber.
3. Use a flathead screwdriver to remove the test
chamber slide gate limit switch sensor from the air
cylinder. Let it hang. Keep track of the screw.
5