Table of Contents
Advertisement
How To...
Replace the User Arms
Tools Required: Phillips Screwdriver, small standard screwdriver, 17mm socket wrench
Estimated Repair Time: 30 Minutes
1. Remove and save the bolt and washer that secure the user arm
to the deadshaft.
2. Remove and save the front moving arm pivot (clevis)covers.
3. Remove and save the bolt and nut that secure the user arm to
the pedal lever assembly.
4. Remove the user arm.
5. Install the new user arm in reverse order using the hardware
removed and saved in the previous steps.
Make sure the cables are wrapped around the user arm as
shown in the illustrations below.
A
Rocker Arm Assembly
out of box
C
Follow arrow on label for
direction of cable routing.
D
Plug in connectors.
B
Assemble moving rocker arm
Deadshaft
.
29
Flat Washer
User Arm
Hex Nut
Hex Bolt
Bolt
Advertisement
Table of Contents
