Replace The Stabilizer Assemblies - Life Fitness E5 Service Manual

Total-body elliptical cross-trainers

Hide thumbs Also See for E5:

Table of Contents

How To...

Replace the Stabilizer Assemblies

Tools Required: Phillips Screwdriver, 17mm Socket Wrench, 17mm Open End Wrench, 4X4 Block of Wood

Estimated Repair Time: 30 Minutes

1. Turn the cross-trainer power switch OFF.

2. Unplug the line cord from the wall outlet.

3. Remove and save the two hex bolts that secure either the front or rear stabilizer to the cross-trainer frame.

4. Carefully lift either the front or rear end of the cross-trainer and place a support block under the frame near the

stabilizer.

5. Remove the stabilizer.

6. If necessary, remove the transport wheels and leg levelers from the old stabilizer and install them on the new one.

7. Carefully lift the cross-trainer and position the new stabilizer assembly so that the mounting holes in the stabilizer

and frame line up.

8. Secure the new stabilizer assembly to the frame using the hex bolts removed and saved in Step 3.

Bolts (2)

Front Stabilizer

Bolts (2)

Rear Stabilizer

Table of Contents