Replace The Console - Life Fitness E5 Service Manual

How To....

Replace the Console

Tools Required: Phillips Screwdriver
Estimated Repair Time: 15 Minutes
1. Turn the cross-trainer power switch OFF.
2. Unplug the line cord from the wall outlet.
3. Remove the upper rear console support cover (see
How To Replace the Upper Rear Console Support
Cover on the previous page).
4. Remove and save the four Phillips screws securing
the console to the console support bracket.
5. Disconnect the ground wire, activity zone cable,
power to console cable, and contact heart rate
cable.
6. Note where each cable connects. This will simplify
reassembly.
7. Install the new console in reverse order by us-
ing the screws removed and saved in Step 4. Be
careful not to pinch the wires when installing the
console.
Power to
Console
Base
Heart Rate Cable
Ground Wire
Coach Zone
Power to Console
GO CONSOLE
Ground
Wire
Coach Zone
Cable
Not Used
Cable
Not Used
Disconnect Pigtail.
Plug into
Base Heart
Rate Cable
Phillips
Screws
(Console) (4)
Rear Console Support Cover Screws (4)
Pigtail
Disconnect
Pigtail.
Plug into
Base Heart
Rate Cable
Cable Not Used
22
Both cables are
labeled "cable 1"
TRACK+ CONSOLE
Coach
Power to
Zone
Console
Not Used
Console
Console
Support Bracket
Rear
Console Support
Cover
Cable