Life Fitness E5 Service Manual page 43

How To....Calibrate the Eddy Current Brake and Servo Motor (continued)
6. Screw the adjuster on the brake cable all the way in, then install the end of the cable into the slide block on the
eddy current brake. Do not insert the end fi tting of the cable housing into the slot at the bottom of the slide block
channel. Screw the adjuster on the brake cable all the way in, then install the end of the cable into the slide block
on the eddy current brake. Do not insert the end fi tting of the cable housing into the slot at the bottom of the slide
block channel. See Figure 3.
7. Insert the other end of the brake cable into the pulley on the servo motor. Wrap the cable around counterclockwise
and then clip the cable into the slot on the servo motor housing. See Figures 4 and 5.
Cable housing
end fitting
Side block
Cable adjuster
screwed all the
way in
Figure 3
42