How To....
Replace the User Handle
Tools Required: Phillips Screwdriver, Metric Allen Wrench Set
Estimated Repair Time: 15 minutes
1. Remove the deadshaft covers.
2. Unplug the connectors wrapped around the deadshaft.
3. Remove the 4 bolts that hold the user handle to the rocker
arm.
4. Reinstall in reverse order. Follow the instructions on the pre-
vious page for the correct cable routing. Make sure cables
are not pinched by a boss when reinstalling the deadshaft
covers.
Replace the Activity Zone
Tools Required: Short Phillips Screwdriver
Estimated Repair Time: 15 minutes
1. Turn the cross-trainer power switch OFF.
2. Unplug the line cord from the wall outlet.
3. Remove and save the fi ve Phillips screws securing the
Activity Zone front to the back.
Note: There are two additional screws that mount the
Activity Zone back plastic to the upright. These do not
need to be removed.
4. Disconnect the cable connections at the Activity Zone.
5. Install the new Activity Zone front cover in reverse
order using the screws removed and saved in Step 3.
Deadshaft
Cover
Screws (2)
Phillips Screws (5)
30
Screws (4)
Deadshaft
Deadshaft
Cover
Cover
Activity Zone