Table of Contents
Advertisement
How To...
Replace the Transport Wheels
Tools Required: 5mm Allen Wrench, 4X4 Block of Wood, Blue Loctite
Estimated Repair Time: 30 Minutes
1. Turn the cross-trainer power switch OFF.
2. Unplug the line cord from the wall outlet.
3. Carefully lift either the front or rear end of the cross-trainer.
4. Place a 4 X 4 block of wood under the stabilizer.
5. Remove and save the two bolts that secure the transport wheel to the stabilizer.
6. Install the new transport wheel using the bolts removed in the previous step.
Support Block
Bolts (2 per wheel)
Transport Wheel
47
Advertisement
Table of Contents
