Activity Zone: Diagnostics
Entering the Activity Zone Diagnostics Menu
Press and Hold the Leg Sculptor key and Stride Length Up key for 5 plus seconds. The display will beep three times
and the display will be in Photo Shoot Mode.
Note: The Activity Zone must be in Idle mode to enter diagnostics. Idle mode is entered after a reboot and after 1 min-
ute of no speed pulses detected and/or key presses. To move through the different Diagnostics screens press the Leg
Sculptor key.
Diagnostics Settings
Photo Shoot Mode - A static image is displayed.
Display Test - All segments on the display light up. The display then cycles through all the individual segments
on the display.
Software Version - The Activity Zone software version is displayed. It is a two-digit value.
Button Test - Tests the buttons unique to the Activity Zone (Stride Length Up and Down, Leg Sculptor, Total
Body Trainer, Resistance Level Up and Down).
19