Table of Contents
Advertisement
How To....
Replace the Deadshaft Covers
Tools Required: Phillips Screwdriver
Estimated Repair Time: 30 Minutes
1. Turn the cross-trainer power switch OFF.
2. Unplug the line cord from the wall outlet.
3. Remove and save the two Phillips screws that secure the deadshaft covers to each other. Discard the covers.
4. Install the new deadshaft covers using the screws removed and saved in Step 3.
Make sure cables do not interfere with
the boss when assembling.
Deadshaft
Cover
Phillips
Screws (2)
Deadshaft
Cover
23
Advertisement
Table of Contents
