How To...
Replace the Cup Holder
Tools Required: none
Estimated Repair Time: 15 Minutes
1. Place one hand above the cup holder.
2. With the other hand, gently tap the bottom of the cup holder.
3. Lift the cup holder out of the accessory tray.
4. Slide the new cup holder into the accessory tray and tap the top of
the cup holder to seat it properly.
Replace the Upper Rear Console Support Cover
Tools Required: Phillips Screwdriver
Estimated Repair Time: 15 Minutes
1. Turn the cross-trainer power switch OFF.
2. Unplug the line cord from the wall outlet.
3. Remove and save the four Phillips screws securing the upper rear console support cover to the console support.
4. Remove the upper rear console support cover.
5. Install the new upper rear console support cover in reverse order using the screws removed and saved in Step 3.
Upper Rear
Console Support
Cover
Phillips Screws (4)
21