Life Fitness E5 Service Manual page 10

PROBLEM OBSERVED
A creaking sound is coming
from the stabilizers.
Errors displayed
on main console
Error messages E1, E2, E3, E4,
E5, or E6 displayed in the
Activity Zone.
Console appears crooked on
the product.
"STRIDE" is blinking
Stride length adjustment is not
working.
Stride length automatically
changes.
Activity Zone displays E5.
Activity Zone display settings
won't work.
Activity Zone displays strange
information in the digital dis-
play.
POSSIBLE CAUSE
Leveler nut loose.
Refer to Go and Track Plus
Service Manuals.
Issue with the electrical stride
adjustment system.
Console mounting bracket
shifted during installation.
Your Duty Cycle is on, which
prevents Over Actuation.
Duty Cycle may prevent Stride
Adjustment. Refer to STRIDE
Blinking - Actuator Duty Cycle
is On section in this manual for
information on how to change.
Check to see if the Leg Sculp-
tor mode is turned ON. The
Leg Sculptor icon is illuminat-
ed when on. The Leg Sculp-
tor automatically adjusts the
stride every 2 minutes during a
workout.
One of the keys on the Activity
Zone is stuck in a pressed in
position.
You have accessed the Set-
tings Menu.
You may have accessed the
Settings Menu or Diagnostics
Menu.
9
CORRECTIVE ACTION
It is very important that the nut on the leveler is
tightened against the stabilizer tube after the
product is leveled. Ensure that this nut is tight.
Refer to Go and Track Plus Service Manuals.
Refer to the Activity Zone Error Message
section in this manual.
The console mounting bracket most likely shift-
ed during customer assembly. Simply need to
loosen the two mounting bolts (17mm wrench)
that hold the console bracket to the upright.
Straighten the assembly and then tighten.
Refer to STRIDE Blinking - Actuator Duty Cycle
is On section in this manual for more informa-
tion on how to Turn Off.
Turn OFF the cross-trainer's power. Turn the
power back on after 30 seconds and try the
stride adjustment again.
To turn the Leg Sculptor OFF, press the Leg
Sculptor key.
Check to see if you can dislodge the Leg Sculp-
tor, Stride Up, or Stride Down key. Once the key
is dislodged, the "E5" will disappear.
To exit the Settings Menu press the Leg Sculp-
tor key until the Settings Menu has been exited.
Press the Leg Sculptor continuously until the
menu is exited.