Brc1H71W; Wireless Remote Controller - Daikin VRV EMERION RXYQ-AATJA Service Manual

SiUS342303E
5.2

BRC1H71W

- Installer setting
- RC settings
- Maintenance
Set the indoor unit group address.
After all settings are complete, press
the "Send to RC" button.
5.3

Wireless Remote Controller

Group No. setting by wireless remote controller for centralized control
1. When in the normal mode, press INSPECTION/TEST button for 4 seconds or more to enter field
2. Set mode No. 00 with MODE button.
3. Set the group No. for each group with UP button or DOWN button.
4. Enter the selected group numbers by pressing RESERVE button.
Part 3 Remote Controller
Group Address
• Assign the group address and unit number for centralized control.
• The group and unit address can only be set when a centralized controller is connected.
This menu is only visible when a centralized controller is connected.
• The group and unit address can be "set" and "released".
NOTICE
Don't forget to release the group address before disconnecting the centralized controller because the
menu will not be accessible afterwards.
- Installer setting
- RC settings
- Maintenance
Main
You can switch between setting the
indoor unit group address for each
group, or for each unit.
setting mode.
Centralized Control Group No. Setting
- Installer setting
- RC settings
- Maintenance
Group
Set the group address on a per-
group basis.
* Set a group address only for the MAIN
unit.
Unit
Set the group address on a per-unit
basis.
Force operation of the fan of the unit
number whose icon has been tapped.
You can confirm the location of the
device on which you are performing
settings.
90