SiUS342303E
1.4.35 Interlocked Operation between Humidifier and Drain Pump
This is used to interlock the humidifier with the drain pump. When water is drained out of the unit,
this setting is unnecessary.
Mode
15 (25)
1.4.36 Individual Setting of Ventilation
This is set to perform individual operation of Energy recovery ventilator using the remote
controller/central unit when Energy recovery ventilator is built in.
(Switch only when Energy recovery ventilator is built in.)
Mode
15 (25)
1.4.37 Display of Error Codes on the Remote Controller
For BRC1E73 only
Error code (four digits) is displayed for limited products.
Select two-digit display if four-digit display is not preferred.
Mode
1.4.38 Room Temperature Display
For BRC1E73 only
A "Detailed display screen" can be selected as the display screen. This setting is used if you do not
want "Room temperature display" to be shown on the "Detailed display screen".
Mode
1.4.39 Thermistor Sensor for Auto Changeover and Setback Control by the
Remote Controller
For BRC1E73 only
Select a thermistor to utilize for the cool/heat mode automatic changeover and setback functions.
The sensed temperature will be displayed on the remote controller as the room temperature.
Mode
Part 5 Field Settings and Test Operation
First Code
Second Code
No.
No.
No.
01
3
02
First Code
Second Code
No.
No.
No.
01
5
02
First Code
Second Code
No.
No.
No.
01
02
1b
4
03
04
First Code
Second Code
No.
No.
No.
01
1c
0
02
First Code
Second Code
No.
No.
No.
01
1c
1
02
Field Settings for Indoor Unit
Contents
Not interlocked
Interlocked
Contents
Normal
Individual
Contents
—
Two-digit display
—
Four-digit display
Contents
Not displayed.
Displayed.
Contents
Utilize the return air thermistor
Utilize the remote controller thermistor
: Factory setting
: Factory setting
: Factory setting
: Factory setting
: Factory setting
176