Add/Edit A Mac Based Vlan - ZyXEL Communications XMG1915 Series User Manual

Figure 195 SWITCHING > VLAN > MAC Based VLAN Setup
The following table describes the fields in the above screen.
Table 150 SWITCHING > VLAN > MAC Based VLAN Setup
LABEL
Index
Name
MAC Address
VID
Priority
Add/Edit
Delete

48.7.1 Add/Edit a MAC Based VLAN

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN > MAC Based VLAN Setup
screen to see this screen.
Figure 196 SWITCHING > VLAN > MAC Based VLAN Setup > Add/Edit
The following table describes the fields in the above screen.
Table 151 SWITCHING > VLAN > MAC Based VLAN Setup > Add/Edit
LABEL
Name
MAC Address
VID
Priority
Apply
Chapter 48 VLAN
DESCRIPTION
This field displays the index number of the MAC-based VLAN entry.
This field displays the name of the MAC-based VLAN entry.
This field displays the source MAC address that is bind to the MAC-based VLAN entry.
This field displays the VLAN ID of the MAC-based VLAN entry.
This field displays the priority level which is assigned to frames belonging to this MAC-based
VLAN entity.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entry.
DESCRIPTION
Enter a name up to 32 alphanumeric characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ] for the
MAC-based VLAN entry.
Enter a MAC address that is bind to the MAC-based VLAN entry. This is the source MAC
address of the data packet that is looked up when untagged packets arrive at the Switch.
Enter an ID (from 1 to 4094) for the VLAN that is associated with the MAC-based VLAN entry.
Enter a priority (0 to 7) that the Switch assigns to frames belonging to this VLAN. The higher
the numeric value you assign, the higher the priority for this MAC-based VLAN entry.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
XMG1915 Series User's Guide
276