Tech-Support - ZyXEL Communications XMG1915 Series User Manual

Chapter 60 MAINTENANCE
Figure 269 Reboot Confirmation
Click YES and then wait for the Switch to restart. This takes up to 2 minutes.
2
Click Config 1 and follow steps 1 to 2 to reboot and load configuration one on the Switch.
Click Config 2 and follow steps 1 to 2 to reboot and load configuration two on the Switch.
Click Factory Default and follow steps 1 to 2 to reboot and load Zyxel factory default configuration
settings on the Switch.
Click Custom Default and follow steps 1 to 2 to reboot and load a customized default file on the Switch.
This will save the custom default configuration settings to both Configuration 1 and Configuration 2.
Note: If a customized default file was not saved, clicking Custom Default loads the factory
default configuration on the Switch.
Note: Service Register only appears in standalone mode.

60.16 Tech-Support

The Tech-Support feature is a log enhancement tool that logs useful information such as CPU utilization
history, memory and Mbuf (Memory Buffer) log and crash reports for issue analysis by customer support
should you have difficulty with your Switch.
Click MAINTENANCE > Tech-Support to see the following screen.
Figure 270 MAINTENANCE > Tech-Support
XMG1915 Series User's Guide
368