Poe Setup; Chapter 34 Poe Setup; Poe Status (For Poe Models Only) - ZyXEL Communications XMG1915 Series User Manual

Chapter 34 PoE Setup

C 34
H A P T E R

PoE Setup

34.1 PoE Status (for PoE models only)

The PoE models supports the IEEE 802.3bt High Power over Ethernet (PoE) standard.
A powered device (PD) is a device such as an access point or a switch, that supports PoE (Power over
Ethernet) so that it can receive power from another device through an Ethernet port.
In the figure below, the IP camera and IP phone get their power directly from the Switch. Aside from
minimizing the need for cables and wires, PoE removes the hassle of trying to find a nearby electric
outlet to power up devices.
Figure 144 Powered Device Examples
You can also set priorities so that the Switch is able to reserve and allocate power to certain PDs.
Note: The PoE (Power over Ethernet) devices that supply or receive power and their
connected Ethernet cables must all be completely indoors.
To view the current amount of power that PDs are receiving from the Switch, click PORT > PoE Setup >
PoE Status.
XMG1915 Series User's Guide
207