Zyxel One Network (Zon) Utility - ZyXEL Communications XMG1915 Series User Manual

Note: The input string of any field in this screen should not contain [ ? ], [ | ], [ ' ], [ " ], or [ , ].
In the Password fields, [ space ] is also not allowed.
Change the default administrator and/or SNMP passwords, and then click Apply to save your changes.
Table 8 Web Configurator: Password/SNMP
LABEL
Password – Administrator
This is the default administrator account with the "admin" user name. You cannot change the default administrator
user name.
Old Password
New Password
Retype to confirm
SNMP – General Setting
Use this section to specify the SNMP version and community (password) values.
Version
Get Community
Set Community
Trap Community
Apply
Cancel

4.3 Zyxel One Network (ZON) Utility

ZON Utility is a program designed to help you deploy and manage a network more efficiently. It detects
devices automatically and allows you to do basic settings on devices in the network without having to
be near it.
The ZON Utility issues requests through Zyxel Discovery Protocol (ZDP) and in response to the query, the
device responds back with basic information including IP address, firmware version, location, system
and model name in the same broadcast domain. The information is then displayed in the ZON Utility
screen and you can perform tasks like basic configuration of the devices and batch firmware upgrade
in it. You can download the ZON Utility at
and unzip it first before installing it in a computer (Windows operating system).
Chapter 4 Web Configurator
DESCRIPTION
Enter the existing system password (1234 is the default password when shipped).
Enter your new system password. Up to 32 printable ASCII characters are allowed for the new
password.
Re-enter your new system password for confirmation.
Select the SNMP version for the Switch. The SNMP version on the Switch must match the version
on the SNMP manager. Choose SNMP version 2c (v2c), SNMP version 3 (v3) or both (v3v2c).
Note: SNMP version 2c is backwards compatible with SNMP version 1.
Enter the Get Community string, which is the password for the incoming Get- and GetNext-
requests from the management station. The Get Community string is only used by SNMP
managers using SNMP version 2c or lower.
Enter the Set Community string, which is the password for the incoming Set- requests from the
management station.
The Set Community string is only used by SNMP managers using SNMP version 2c or lower.
Enter the Trap Community string, which is the password sent with each trap to the SNMP
manager.
The Trap Community string is only used by SNMP managers using SNMP version 2c or lower.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
https://www.zyxel.com/global/en/form/zon-utility-download
XMG1915 Series User's Guide
53