Lldp-Med Network Policy; Add/Edit Lldp-Med Network Policy - ZyXEL Communications XMG1915 Series User Manual

Table 103 PORT > LLDP > LLDP MED> LLDP-MED Setup (continued)
LABEL
Notification
Topology
Change
MED TLV Setting
Location
Network Policy
Apply
Cancel

33.9 LLDP-MED Network Policy

Click PORT > LLDP > LLDP MED > LLDP-MED Network Policy to display the screen as shown next.
Figure 140 PORT > LLDP > LLDP MED > LLDP-MED Network Policy
The following table describes the labels in this screen.
Table 104 PORT > LLDP > LLDP MED > LLDP-MED Network Policy
LABEL
Index
Port
Application Type
Tag
VLAN
DSCP
Priority
Add/Edit
Delete

33.9.1 Add/Edit LLDP-MED Network Policy

To access this screen, click the Add/Edit button or select an entry from the list and click the Add/Edit
button.
Chapter 33 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
Select to enable LLDP-MED topology change traps on this port.
Select to enable transmitting LLDP-MED location TLV.
Select to enable transmitting LLDP-MED Network Policy TLV.
Click Apply to save the changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This field displays the of index number of the network policy. Click an index number to edit
the rule.
This field displays the port number of the network policy.
This field displays the application type of the network policy.
This field displays the Tag Status of the network policy.
This field displays the VLAN ID of the network policy.
This field displays the DSCP value of the network policy.
This field displays the priority value of the network policy.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new schedule rule or edit a selected one.
Select the rules that you want to remove, then click Delete.
XMG1915 Series User's Guide
202