ZyXEL Communications XMG1915 Series User Manual page 189

Chapter 33 Link Layer Discovery Protocol (LLDP)
Figure 130 PORT > LLDP > LLDP > LLDP Local Status
The following table describes the labels in this screen.
Table 94 PORT > LLDP > LLDP > LLDP Local Status
LABEL DESCRIPTION
Basic TLV
Chassis ID TLV This displays the chassis ID of the local Switch, that is the Switch you are configuring. The
chassis ID is identified by the chassis ID subtype.
• Chassis ID Subtype – This displays how the chassis of the Switch is identified.
• Chassis ID – This displays the chassis ID of the local Switch.
System Name System Name – This shows the host name of the Switch.
TLV
System System Description – This shows the firmware version of the Switch.
Description TLV
System This shows the System Capabilities enabled and supported on the local Switch.
Capabilities TLV
• System Capabilities Supported – Bridge
• System Capabilities Enabled – Bridge
Management The Management Address TLV identifies an address associated with the local LLDP agent
Address TLV
that may be used to reach higher layer entities to assist discovery by network management.
The TLV may also include the system interface number and an object identifier (OID) that are
associated with this management address.
This field displays the Management Address settings on the specified ports.
• Management Address Subtype – ipv4 or all-802
• Interface Number Subtype – unknown
• Interface Number – 0 (not supported)
• Object Identifier – 0 (not supported)
LLDP Port Information
This displays the local port information.
XMG1915 Series User's Guide
189