ZyXEL Communications XMG1915 Series User Manual page 92

Figure 56 DASHBOARD (example PoE model)
The following table describes the labels in this screen.
Table 23 DASHBOARD
LABEL DESCRIPTION
Pause Auto The DASHBOARD screen automatically refreshes every 30 seconds.
Refresh
Click this to disable the auto refresh. Click Resume Auto Refresh to enable.
Port Status This displays individual port type, status, and connection speed of the Switch.
Click on a port to open the port's status panel. Use the status panel to enable/disable a port,
power cycle a PoE port, and view its basic information. For example, link speed and port
utilization.
Note: The port status may vary for non-PoE and PoE models.
System Information
System This field displays the name used to identify the Switch on any network.
Name
System This field displays the geographic location name you set for the Switch.
Location
Boot Version This field displays the version number and date of the boot module that is currently on the
Switch.
ZyNOS F/W This field displays the version number and date of the firmware the Switch is currently running.
Version
System Time This field displays the current date and time in the UAG. The format is mm/dd/yyyy hh:mm:ss.
System This field displays how long the Switch has been running since it last restarted or was turned on.
Uptime
Serial This field displays the serial number of this Switch. The serial number is used for device tracking
Number
and control.
Hardware This field displays the hardware version of the Switch.
Version
System MAC This field displays the MAC address of the Switch.
Address
Chapter 7 DASHBOARD
XMG1915 Series User's Guide
92