Ipv6 Static Route; Add/Edit Ipv6 Static Route - ZyXEL Communications XMG1915 Series User Manual

52.3 IPv6 Static Route

Click NETWORKING > Static Routing > IPv6 Static Route to display the screen as shown.
Figure 222 NETWORKING > Static Routing > IPv6 Static Route
The following table describes the related labels you use to create a static route.
Table 174 NETWORKING > Static Routing > IPv6 Static Route
LABEL
Index
Interface
Route
Destination /
Prefix Length
Next Hop
Add/Edit
Delete

52.3.1 Add/Edit IPv6 Static Route

Click Add/Edit, or select an entry and click Add/Edit in the NETWORKING > Static Routing > IPv6 Static
Route to display this screen.
Figure 223 NETWORKING > Static Routing > IPv6 Static Route > Add/Edit
Chapter 52 Static Route
DESCRIPTION
This field displays the index number of the route.
This field displays the descriptive name of the interface that is used to forward the packets to
the destination.
This field displays the IPv6 subnet prefix and prefix length of the final destination.
This field displays the IPv6 address of the gateway that helps forward the packet to the
destination.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XMG1915 Series User's Guide
307